AudioControl D-4.800 Matrix DSP 2/3/4-Channel Car Audio Amplifier with AccuBASS, 800W, Class D Premium High-Fidelity Multichannel Amp, 30-Band Equalizer, Works with OEM & Aftermarket Sound Systems

Amplifier and DSP in one package Two keys to unlocking great sound in a car stereo system are serious power and extensive control - and this amp's got them both. For power, AudioControl's D-4.800 4-channel amplifier generates 125 watts RMS per channel, so it'll drive even the most demanding aftermarket speakers with plenty of headroom to spare. You could also bridge the D-4.800 to drive a couple subwoofers with 400 watts RMS each. Computer-controlled digital signal processing Smart-User DSP tuning software on a laptop (DM-810 version shown) You won't find any knobs on the D-4.800 - you make adjustments and save settings via your laptop (PC or Mac). AudioControl's Smart-User DSP software package includes 12 or 24 dB/octave Linkwitz-Riley crossovers, 30-band equalizers, parametric filters, time delay/alignment for inputs and outputs, phase correction, AccuBass(tm) bass correction, and real-time analyzers (RTA) for the inputs and outputs so you can visually confirm the improvements in the sound. It's made to work with a factory radio Six active speaker-level inputs allow you to connect this amp to almost any factory system, even ones that have separate pre-filtered, time-aligned, and amplified signals going to separate factory speakers and tweeters. The D-4.800 sums them into one smooth, unified signal for you to balance, align, and tune for your better-sounding aftermarket speakers. AudioControl's Great Turn On (GTO(tm)) signal-sensing circuitry turns the amp on automatically whenever it senses an input, so you won't have to run a separate turn-on lead back to the receiver. Convenient features Onboard LEDs indicate optimized signal flow for inputs and outputs, plus give you a warning when a source is too loud and causing distortion. An optional ACR-3 wired remote controller lets you select sources, control levels, and recall presets from your front seat.

• 𝗠𝘂𝗹𝘁𝗶-𝗖𝗵𝗮𝗻𝗻𝗲𝗹 𝗙𝗹𝗲𝘅𝗶𝗯𝗶𝗹𝗶𝘁𝘆: Configurable as a 4-channel, 3-channel, or 2-channel amplifier for use with a variety of car sound systems.
• 𝗣𝗲𝗿𝗳𝗲𝗰𝘁 𝗳𝗼𝗿 𝗢𝗘𝗠 𝗜𝗻𝘁𝗲𝗴𝗿𝗮𝘁𝗶𝗼𝗻 𝗮𝗻𝗱 𝗔𝗳𝘁𝗲𝗿𝗺𝗮𝗿𝗸𝗲𝘁 𝗕𝘂𝗶𝗹𝗱𝘀: Features 6 speaker level inputs, 4 balanced RCA analog line-level preamp inputs, and 2 assignable preamp outputs. Input/output RTAs for each pair help you easily identify and sum factory speaker signals for precise and informed tuning.
• 𝗣𝗼𝘄𝗲𝗿𝗳𝘂𝗹 𝗠𝗮𝘁𝗿𝗶𝘅 𝗗𝗦𝗣 𝗖𝗮𝗽𝗮𝗯𝗶𝗹𝗶𝘁𝗶𝗲𝘀: Pick and choose outputs from any combination of inputs, and add crossovers, filters, and EQ as needed. The DM Smart App gives you instant and clear control over every aspect of your processor, with a smart GUI and intuitive workflow.
• 𝗔𝘄𝗮𝗿𝗱-𝗪𝗶𝗻𝗻𝗶𝗻𝗴 𝗖𝗹𝗮𝘀𝘀 𝗗 𝗔𝗺𝗽𝗹𝗶𝗳𝗶𝗲𝗿 𝗧𝗲𝗰𝗵𝗻𝗼𝗹𝗼𝗴𝘆: Provides unprecedented output up to 800W (4 x 125W @ 4Ω, 4 x 200W @ 2Ω, 2 x 400 W @ 4Ω Bridged).
• 𝗔𝗰𝗰𝘂𝗕𝗔𝗦𝗦 𝗥𝗲𝘀𝘁𝗼𝗿𝗮𝘁𝗶𝗼𝗻: Corrects bass roll-off caused by processing built-in to your factory head unit.
• 𝗕𝘂𝗶𝗹𝘁-𝗜𝗻 𝗗𝗶𝗮𝗴𝗻𝗼𝘀𝘁𝗶𝗰 𝗖𝗼𝗱𝗲𝘀: Provide exact insight should the amplifier detect a problem.
• 𝗚𝗧𝗢 𝗦𝗶𝗴𝗻𝗮𝗹 𝗦𝗲𝗻𝘀𝗶𝗻𝗴: Gracefully turns on your amplifier when an incoming audio signal is detected on inputs 1 and 2, then turns off after a period of time when the audio signal fades away to silence.
• 𝗠𝗜𝗟𝗖 𝗖𝗹𝗶𝗽 𝗗𝗲𝘁𝗲𝗰𝘁𝗶𝗼𝗻 𝘄𝗶𝘁𝗵 𝗟𝗘𝗗 𝗜𝗻𝗱𝗶𝗰𝗮𝘁𝗼𝗿: Prevents clipping and potentially damaging distortion.
• 𝗦𝗲𝗹𝗲𝗰𝘁𝗮𝗯𝗹𝗲 𝗖𝗿𝗼𝘀𝘀𝗼𝘃𝗲𝗿𝘀: High-pass, low-pass, and band-pass crossovers (at 12and 24 dB/octave for Linkwitz-Riley or 18 dB/octave Butterworth) ensure only the correct frequencies reach your car audio speakers.
• 𝗚𝗿𝗮𝗽𝗵𝗶𝗰 𝗮𝗻𝗱 𝗣𝗮𝗿𝗮𝗺𝗲𝘁𝗿𝗶𝗰 𝗘𝗾𝘂𝗮𝗹𝗶𝘇𝗲𝗿𝘀: A 30-band graphic EQ and 10-band parametric EQ per output channel provides precise, targeted tuning.